Before Survey we need these report:
After Implementation Diagram
Trucking diagram
Link Budget
Need to be check during Survey:
1. Site name
2. Lat/Long
3. Macro
Site-If proposed then check pole
4. no. of
Floor
5.
Occuparacy details means Shop name,or any room name
6.Cover
details which is covered by our Equipment
7.Indoor
rack space
8.Power
taping-32ams
After Survey
just send the report..As collected survey report planning team will decide no.
of antenna,RRH etc..
Why Reliance Jio not connected with Multiband
combiner:
Because
there is a lot of loss through this multiband combiner & Signal passes
through Co-axial cable but we are using CIPRI Optical cable. In CIPRI cable
loss is less compare to co-axial cable.
As per guide lines of NHQ output from antenna should be 12db ,if we will use
Multiple operator combiner then due to co-axial cable ,we can not get 12 db
output through antenna.
Omni Antenna: 360 degree /covers 10-30 meters
Patch Antenna: 120 degree
EIRP: BTS output power-Splitter loss-
coupler loss-connector loss-cable loss
+Antenna
gain
Active & Passive:
Passive: Passive device will not generate
anything….Only input or output
Active:
